The following picture depicts the Pen’s various parts:

The Zpen comes with two already inserted batteries. All you need to do is to remove the small isolator strip from the battery compartment (see picture below):

- Unscrew the top of the pen.

- Pull the isolator strip out

- Screw the Battery Cap back on

At some point, you may need to replace the Zpen’s batteries or pen tip. The subsections that follow describe how to do so when necessary.

Replacing the ink refill

When replacement of the pen ink refill is needed, simply follow the drawing for extracting the ink refill (inserting a new standard mini-ballpoint ink refill is done in the same way).

Inserting the pen’s Batteries

The Zpen requires two regular 393 watch batteries.

To insert the Zpen batteries:

1. Unscrew the top of the pen.

2. Insert the batteries.

3. Screw the pen top back on.