Power Button

This button can turn the PRINTSTIK on or off. Turning the PRINTSTIK on requires holding the button down for three seconds. After this brief period the button can be released. At this point, the “Battery Life Light” and “Data Stream” will light up signifying the PRINTSTIK is on and operational.

When turning PRINTSTIK off, the power button would need to be pressed down firmly for another three seconds. Once the button is released, the “Data Stream Light” and “Battery Life Light” should both be turned off signifying the PRINTSTIK is off.

Paper Feed Button

The main function of the “Paper Feed Button” is to insert paper into the PRINTSTIK and to release paper. Inserting paper is important for loading a thermal paper roll, paper cartridge or single sheet (For more information see Page 22). Releasing paper is useful to provide spacing after printing and for paper removal.

PRINTSTIK Print Testing

The PRINTSTIK has a convenient method to test its printing ability quickly. This can be accomplished easily by pressing the Paper feed button and the Power button simultaneously. Once you do, a small message will print showing that the PRINTSTIK if functioning properly.

Printing Status

The “Printing Status” being on provides notification that the PRINTSTIK is currently printing.

Battery Life

The “Battery Life” light shows different color lighting in relation to the amount of battery life remaining. The color code and representation is shown below:

NOTE: When charging the printer, the “Battery Life” light will stay red. The “Battery Life” light will not change color; you must turn on the printer at which point you will see the battery life according to the above battery life color code representation.

Data Stream

This light which is in the shape of a “Z” letter signifies that the printer is on and Bluetooth connectivity is established.