You can setup the exact values of the color and resolution modes, using the interactiveProfile Configurator dialog box. The Profile Configurator dialog is part of theDocuPen Scanner Control window and can be started by selecting the Open ProfileDialog.. from the pull-down menu in the DocuPen Scanner Control window.

In the Profile Configurator dialog you can choose from: (See table on following page)

You can select the desired values from the corresponding pull-down menus in theProfile Configurator dialog. When desired selection is completed, you can press theSet button. You will be prompted to turn the DocuPen ON and then the values will betransferred to the DocuPen.

Note: Your DocuPen must be CONNECTED to your PC

You can also check the current values in your DocuPen by selecting the Get button.You will be then prompted to turn the DocuPen on and then the value will be displayedin the corresponding cell.

Note: You must click on the Set button after every manipulation of the data. Only then will the data be transferred and saved into the DocuPen!

When desired color and resolution values are set and uploaded to DocuPen you canclose the Profile Configurator dialog. Click the Close button within the ProfileConfigurator dialog box and resume your scanning operation.