Scanning Pens Digital Pens

Show VAT Inc / Excl / Both

The C-Pen 3.0 is a handheld scanner, just scan the words you need directly to the cursor in any open application on your computer.....

Find out more

Standard delivery within the EU takes 3 days.

+442079764910

Got a question?  Call us on:

Knowledge Base

GETTING STARTED: DigiMemo A502

 

The DigiMemo A502/692 is a stand-alone device with storage capability that digitally captures and stores everything you write or draw with ink on ordinary paper, without the use of computer and special paper. Then you can easily view, edit, organize and share your handwritten notes in Windows.

 

EQUIPMENT CHECKLIST

The following items are included in your DigiMemo A502/692 package:

 

 

Notepad (already held on the digital pad)

Two Replacement Ink Cartridges (already stored in the digital pad)

USB Cable for DigiMemo A502/692

Four Batteries (1.5 volt, size AAA)

One 1.55V Button Cell Battery

User Guide

DigiMemo Manager Software CD

 

 

THE PARTS OF THE DIGITAL PAD

 

 

 

 

INSTALLING THE BATTERIES INTO THE DIGITAL PAD

 

To open the battery compartment cover of the digital pad, slide it outward while pressing the raised dots on the middle of the cover. Insert four batteries (1.5 volt, size AAA) into the battery compartment in accordance with the indication in the battery compartment. Close the battery compartment cover.


Note! Incorrect battery installation may damage the digital pad.


Note! Do not mix new and used batteries.


Note! With continuous use of the digital pad, four AAA alkaline batteries will last approximately 100 hours.


Note! The battery compartment cover has a safe function. When the battery compartment cover is not completely closed or is opened, the digital pad can not be turned on to capture and store your handwriting.

 

 

INSTALLING THE BATTERY INTO THE DIGITAL INKING PEN

 

Unscrew the barrel cover counterclockwise from the barrel of the pen. Take out the button cell battery (SR626SW, 377 or IEC-SR66) that is included in the package of the DigiMemo A502/692. Insert the battery into the battery compartment with the negative (-) cap facing the battery compartment. Screw the barrel cover clockwise onto the barrel until tight.


Note! Incorrect battery installation will result in the malfunction of the digital inking pen.

 

 

 

 

Note! The battery of the digital inking pen will last approximately 14 months.


Note! The front or rear section of the pen can hold the pen cap.

 

 

 

Note! You can attach some cord or accessory to the pen through the two holes on the pen end.


Note! You can clip the pen to the pad by using the pen clip to clip to the right or left pen holder of the pad.

 

 

 

 

 

PUTTING A NOTEPAD OR PAPER ON THE DIGITAL PAD

 

To hold a notepad on the pad, slide the backing of the notepad down into the notepad slot on the pad as far as the backing can possibly go.


Note! The size of the notepad holder on the pad is 6.0" x 9.1" (153 mm x 232 mm). Your notepad size can not be over this size.


You can directly put a few sheets of paper on the writing area of the pad for your writing. You also can use the paper clip to clip a few sheets of paper on the pad for your writing.

 

 

 

 

 

 

THE WRITING AREA AND THICKNESS FOR MODEL DIGIMEMO A502

 

The writing area is the area on the digital pad where the digital pad can digitally capture and store everything you write with the digital inking pen as digital ink. The writing area is 150 mm x 211 mm (5.9" x 8.3").


The writing thickness is the maximum thickness above the writing area where the digital pad can digitally capture and store everything you write with the digital inking pen as digital ink. The writing thickness is 12 mm (0.47") about 120 sheets of paper.

 

 

 

 

 

 

 

STORAGE DEVICE IN THE DIGITAL PAD

 

The digital pad is equipped with a built-in 32 MB storage device to store your handwritten notes. You also can load an optional CompactFlash (CF) memory card into the pad to expand the storage capacity of the pad.


To load an optional CompactFlash (CF) memory card, open the battery compartment cover of the pad. By holding the memory card with the rear label facing upward, insert the memory card into the card-slot firmly. Close the battery compartment cover of the pad.

 

 

 

 

 

 

Note! The optional memory card must be Type I CompactFlash (CF) memory card.


Note! Some brands of memory cards may not be compatible with this digital pad. Before purchasing a memory card, consult its manufacturer or dealer. Along with the digital pad, we recommend you to use CompactFlash (CF) memory cards (8 MB to 512 MB) of the brand SanDisk.

 

 

Rating:

Accepted Credit Cards

RSS

Skype Me™!

Order Our Free Catalogue

SSL

As a customer since 2007 I would like to say the service and quality provided have been exceptional. You saved my time on many occasions and proved yourself 100%.

- Muzaffar, London


Click here to submit your own testimonial.

Payment Options

Terms and Conditions | Support | Privacy Policy | Tracking | Payment Methods | How to Order | Trade Account | Catalogue
Opinions expressed in comments or reviews within this site are those of their owners and may not reflect the opinion of Scanning Pens Ltd. All logos and trademarks within this site are the property of their respective owners.
Scanning Pens Ltd is part of the TJSC Group. Copyright © 2002-2011 Scanning Pens Ltd.
Sitemap | Can you help?

  Loading...